Specifications
Super ball runner block, steel
Size | Preload class | Seal | Lubrication | Accuracy class | Weight |
---|---|---|---|---|---|
30 | C0 | SS | Pre-lubricated | H | 800g |
a)
For O-ring
Size 15: Ø 4 · 1.0 (mm)
Size 20 - 35: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
b)
Lube nipple, size 15 - 20:
Funnel-type lube nipple DIN 3405–A M3x5, B2 = 1.6 mm
When using different lube nipples, pay attention to the screw-in depth of 5 mm!
Lube nipple, size 25 - 35:
Hydraulic-type lube nipple DIN 71412–A M6x8, B2 = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on all sides.
T | 80 | mm | |
A | 90 | mm | |
A2 | 28 | mm | |
B | 75.3 mm +0.5 | ||
E1 | 72 | mm | |
E9 | 14.60 | mm | |
H1 | 35.35 | mm | |
Dimension H2 without cover strip | 28.35 | mm | |
K2 | 30.50 | mm | |
K4 | 6.05 | mm | |
N6 | 17 mm ±0.5 | ||
S2 | M10 | ||
S9 | M3x5 |
V1 | 7 | mm | |
A1 | 45 | mm | |
A3 | 31 | mm | |
B1 | 45 | mm | |
E8 | 48.40 | mm | |
H | 42 | mm | |
Dimension H2 with cover strip | 28.55 | mm | |
K1 | 28.80 | mm | |
K3 | 6.05 | mm | |
N1 | 11 | mm | |
S1 | 8.50 | mm | |
ØS5 | 9 | mm |
m (Without friction of seal) | 0,002 ... 0,003 | ||
vmax | 5 | m/s | |
Operating conditions | Operating conditions | ||
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. ) | -10 °C ... +80 °C |
amax (If Fcomb > 2.8 • Fpr : amax = 50 m/s2) | 500 | m/s² | |
m | 0.80 | kg | |
Size | 30 |