Specifications
Ball runner block CS, made of Carbon steel
Size | Preload class | Seal | Lubrication | Accuracy class | Weight |
---|---|---|---|---|---|
55 | C1 | SS | No initial lubrication | P | 7,500g |
a)
Recommended position for pin holes (dimension E4 see general technical notes and information in the "Installation" section).
Rough-drilled holes may be present here from manufacturing. These may be bored open.
b)
Lube nipple, size 55:
Hydraulic-type lube nipple DIN 71412-B M6x8, B2 = 16 mm
Lube nipple, size 65:
Hydraulic-type lube nipple DIN 71412-B M8x1x8, B2 = 16 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on end-face.
c)
Sealing plugs may be present here from manufacturing. Remove these prior to mounting.
d)
Size 65
V1 | 12 | mm | |
A1 | 70 | mm | |
A3 | 43.50 | mm | |
B1 | 155.50 | mm | |
E2 | 95 | mm | |
E8 | 80 | mm | |
E9 | 22.30 | mm | |
H | 70 | mm | |
Dimension H2 with cover strip | 48.15 | mm | |
K3 | 9 | mm | |
N2 | 13.50 | mm | |
S1 | 12.40 | mm | |
ØS5 | 16 | mm | |
T | 120 | mm |
A | 140 | mm | |
A2 | 53 | mm | |
B | 199 mm +0.5 | ||
E1 | 116 | mm | |
E3 | 70 | mm | |
E8.1 | - | ||
E9.1 | - | ||
H1 | 57 | mm | |
Dimension H2 without cover strip | 47.85 | mm | |
N1 | 18 | mm | |
N6 | 29 mm ±0.5 | ||
S2 | M14 | ||
S9 | M5x8 |
amax (If Fcomb > 2.8 • Fpr : amax = 50 m/s2) | 250 | m/s² | |
m | 7.50 | kg | |
Operating conditions | Operating conditions | ||
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. ) | -10 °C ... +80 °C |
vmax | 3 | m/s | |
m (Without friction of seal) | 0,002 ... 0,003 | ||
Size | 55 |