a)
For O-ring
size 55/85: Ø 7 · 1.5 (mm)
size 65/100: Ø 12 · 1.5 (mm)
Open lube port if necessary (see section entitled "Lubrication").
b)
Recommended position for pin holes
(E4 dimensions, see section entitled "Notes for mounting", segment "Pinned fitting").
Rough-drilled holes made for may exist at this position for manufacturing reasons. They are suitable for drilling out.
c)
Lube nipple, thread M6 – 8 deep:
Connection possible on all sides.
Dimensions differ among different connection pieces. See "Accessories" for more information about lube ports.
| A | 165 | mm | |
| A2 | 85 | mm | |
| A3.1 | 40 | mm | |
| B1 | 162.10 | mm | |
| B3 | 216 | mm | |
| E2 | 95 | mm | |
| E8 | 40 | mm | |
| E9 | 10.75 | mm | |
| H | 80 | mm | |
| Dimension H2 with cover strip | 47.85 | mm | |
| K2 | 46.55 | mm | |
| N5 | 19 | mm | |
| N6 | 31.2 mm ±0.5 | ||
| ØS5 | 14 | mm | |
| T3 | 32 | mm |
| A1 | 82.50 | mm | |
| A3 | 40 | mm | |
| B | 205.50 | ||
| B2 | 209.50 | mm | |
| E1 | 140 | mm | |
| E3 | 40 | mm | |
| E8.2 | 113.60 | mm | |
| E9.2 | 50.75 | mm | |
| H1 | 68 | mm | |
| K1 | 43.55 | mm | |
| N3 | 19 | mm | |
| N5.1 | 19 | mm | |
| S2 | M12 | ||
| T (Dimension T = Division of the Roller Guide Rail) | 60 | mm | |
| V1 | 12 | mm |
| C | 165,000 | N | |
| Mt | 7,450 | Nm | |
| ML | 4,030 | Nm |
| C0 | 345,300 | N | |
| Mt0 | 15,650 | Nm | |
| ML0 | 8,440 | Nm |
