a)
For O-ring Ø 15 • 2.5 (mm)
For lube port from above:
- size 100: Open lube port (see section entitled "Lubrication").
- size 125: Remove screw plug.
b)
Lube nipple, thread M8x1:
Connection possible on all sides.
All lube ports of size 125 in metal.
c)
Side lube ports on two sides, in end caps only with size 100.
| T (Dimension T = Division of the Roller Guide Rail) | 105 | mm | |
| A | 250 | mm | |
| A2 | 100 | mm | |
| B | 296.50 | ||
| B2 | 301.50 | mm | |
| B4 | - | ||
| E2 | 150 | mm | |
| E8.2 | 130 | mm | |
| E9 | 9 | mm | |
| E9.3 | 70 | mm | |
| H1 | 105 | mm | |
| K1 | 44 | mm | |
| N1 | 30 | mm | |
| N5 | 17.50 | mm | |
| N7 | - | ||
| S2 | M20 |
| V1 | 20 | mm | |
| A1 | 125 | mm | |
| A3 | 75 | mm | |
| B1 | 204 | mm | |
| B3 | 309.50 | mm | |
| E1 | 200 | mm | |
| E8 | 64 | mm | |
| E8.3 | 162.60 | mm | |
| E9.2 | 29.40 | mm | |
| H | 120 | mm | |
| Dimension H2 with cover strip | 87.30 | mm | |
| K2 | 49.90 | mm | |
| N2 | 22 | mm | |
| N6 | 55 mm +0.5 | ||
| ØS1 | 17,5 | ||
| ØS5 | 25 | mm |
| amax (Prerequisite: There must be preload, even during operation under load.) | 150 | m/s² | |
| m | 32 | kg | |
| m (Without friction of seal) | 0,0004 ... 0,001 | ||
| Size | 100 |
| vmax | 2 | m/s | |
| FR (Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. The friction is approx. 50% higher immediately after lubrication. ) | 400 | N | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. ) | -10 °C ... +80 °C |
