R182422360 Bosch Rexroth

REXROTH R182422360 roller runner block carbon steel

Name: R182422360 REXROTH
Brand: REXROTH
SKU: 113801-en-usd
Price: 528.43 USD
Availability: SoldOut

RWA-025-SLH-C2-H-2

$528.43 ~~$1,056.86~~ -50%

Limited stock only available on quotation

Find your match! Click to explore guide rails that pair with this runner block

Specifications

Roller runner block Resist CR with corrosion-resistant coating, matt silver finish, hard chrome plated

Series (R1824)	Slimline, long, high R1824...2
Size (2)	25 size
Preload class (2)	C2 Average preload

Accuracy class (3)	H Hight Accuracy Level
Seals (60)	SS standard seal

Dimensions
Technical data

^a) For O-ring: Size 25: Ø 5 · 1.5 (mm). Open the lube port if required. Please request instructions. For new designs, use the runner blocks for lubrication from above.
^b) Recommended position for pin holes (see general technical notes and information in the "Maintenance" section). Pre-drilled holes may be present at this position for manufacturing reasons. They are suitable for drilling out.
^c) Lube nipple, thread M6 – 8 deep: Connection is only possible on end-face. Dimensions differ among different connection pieces. See "Accessories" for more information about lube fittings.
^d) For guide rails of accuracy class H, this base area may be without a slot for manufacturing reasons.

A		48
A₂		23
B		109
B₂		111
d₈		6
E₁		35
E₈		33.4
E₉		12.4
H		40
Dimension H₂ with cover strip		23.6
K₁		20.6
N₅		9.5
S₂		M6
S₉ (Thread for adjoining parts)		M3 ‒ 5 mm deep
V₁		7.5

A₁		24
A₃		12.5
B₁		81.5
B₃		115
d_8.2		5
E₂		50
E_8.2		40.22
E_9.2		25.4
H₁		34
Dimension H₂ without cover strip		23.4
N₃		9
N₆		14.3 mm ±0.5
ØS₅		7
T₂ (Dimension T2 = hole spacing in the roller guide rail)		30

a_max (Prerequisite: There must be preload, even during operation under load.)		150
m		0.9
μ (Without friction of seal)		0.0004 ... 0.001
Operating conditions		Operating conditions

v_max (Speeds of up to 4 m/s are possible. Service life is limited by wear of plastic parts.)		3
F_R (Guideline value for frictional drags of the complete, sealed and lubricated roller runner blocks. )		30
Material		CR
Permissible ambient temperature (min ... max) (Brief peaks up to 100 °C are permitted. For even lower sub-zero temperatures, please consult us. )		-10 °C ... +80 °C