R16514137Z Bosch Rexroth

REXROTH R16514137Z ball runner block resist cr

Name: R16514137Z REXROTH
Brand: REXROTH
SKU: 111110-en-usd
Price: 468.29 USD
Availability: SoldOut

KWD-045-FNS-C1-H-1

$468.29 Limited stock only available on quotation

Find your match! Click to explore guide rails that pair with this runner block

Specifications

Area of application: For high rigidity requirements
Significantly reduced frictional oscillations and low friction level, particularly under external load
Maximum precision
Ball Runner Block body made of corrosion-resistant steel as per DIN EN 10088. Version recommended by Rexroth if corrosion protection is required. Fast delivery.
Patented entry zone increases the travel accuracy up to a factor of six

Ball runner block Resist CR with corrosion-resistant coating, matt silver finish, hard chrome plated

Series (R1651)	Flange, normal, standard height R1651
Size (4)	45 size
Preload class (1)	C1 Moderate preload

Accuracy class (3)	H Hight Accuracy Level
Seals (7Z)	DS Double-lip seal without ball chain

Dimensions
Technical data

^a) For O-ring
Size 45: Ø 5 · 1.0 (mm)
Open lube port if necessary (see general technical notes and information in the "Maintenance" section).
^b) Recommended position for pin holes (dimension E₄ see general technical notes and information in the "Installation" section)
Rough-drilled holes may be present here from manufacturing. These may be bored open.
^c) Lube nipple, size 45:
Hydraulic-type lube nipple DIN 71412-A M6x8, B₂ = 9.5 mm
When using different lube nipples, pay attention to the screw-in depth of 8 mm!
The lube nipple is included in the scope of delivery (not installed).
Connection is possible on all sides.
^d) Sealing plugs may be present here from manufacturing. Remove these prior to mounting.

V₁	10	mm
A₁	60	mm
A₃	37.50	mm
B₁	97	mm
E₂	80	mm
E₈	69.80	mm
H	60	mm
Dimension H₂ with cover strip	40.15	mm
K₁	17.30	mm
K₃	8.20	mm
N₁	15	mm
N₆	23.5 mm ±0.5
S₂	M12
S₉	M4x7

A	120	mm
A₂	45	mm
B	137.6 mm +0.5
E₁	100	mm
E₃	60	mm
E₉	20.90	mm
H₁	50.30	mm
Dimension H₂ without cover strip	39.85	mm
K₂	19.30	mm
K₄	8.20	mm
N₂	12.40	mm
S₁	10.40	mm
ØS₅	14	mm
T	105	mm

a_max (If F_comb > 2.8 • F_pr : a_max = 50 m/s²)	500	m/s²
m	3	kg
Operating conditions	Operating conditions
Permissible ambient temperature (min ... max) (Up to 100 °C permissible for short periods. For operation at negative temperatures, please consult us. )	-10 °C ... +80 °C