Specifications
Series (CMMP) | Motor controller, premium |
---|---|
Motor type (AS) | AC synchronous |
Nominal current (C2) | 2 A |
Nominal input voltage (3A) | 230 V AC/50-60Hz |
---|---|
Number of phases | Single-phase |
Number of slots (M3) | With 3 slots |
Features of digital logic outputs | Galvanically isolated Freely configurable in some cases | ||
Number of analogue setpoint inputs | 2 | ||
Working range setpoint input | ± 10 V | ||
Number of analogue monitor outputs | 2 | ||
Resolution of monitor outputs | 9 bit | ||
Type of mounting | On sub-base Screw-clamped | ||
Display | 7-segment display | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EC Machinery Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
Storage temperature | -25 °C ... 70 °C | ||
Relative air humidity | 0 - 90% | ||
Pollution degree | 2 | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Nominal operating voltage AC | 230 V | ||
Mains frequency | 50 Hz ... 60 Hz | ||
Mains filter | Integrated | ||
Brake resistance | 60 Ohm | ||
Nominal voltage for logic power supply DC | 24 V | ||
Current consumption of logic power supply without clamping brake | 0,55 A | ||
Nominal output current | 2,5 A | ||
Peak current per phase, effective | 5 A | ||
Controller nominal output | 500 VA | ||
Output frequency | 0 Hz ... 1.000 Hz | ||
Fieldbus link | CANopen DeviceNet EtherCAT EtherNet/IP Modbus/TCP PROFINET Profibus DP | ||
Process interfacing | I/O coupling For 256 position sets | ||
Bus connection | Plugs 9-pin Sub-D | ||
Encoder interface output, function | Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave drive. | ||
Encoder interface input, function | Setpoint speed value as encoder signal Specifies the speed of the slave drive in synchronous mode. | ||
Features of logic input | Galvanically isolated Freely configurable | ||
Number of digital logic outputs 24 V DC | 5 |
Max. current digital logic outputs | 100 mA | ||
Features of setpoint inputs | Differential inputs Configurable for speed Configurable for current | ||
Impedance of setpoint input | 20 kOhm | ||
Working range of monitor outputs | ± 10 V | ||
Features of monitor outputs | Short-circuit proof | ||
Product weight | 2.100 g | ||
Approval | RCM trademark c UL us listed (OL) | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK regulations for machines To UK regulations for electrical equipment To UK RoHS instructions | ||
Ambient temperature | 0 °C ... 40 °C | ||
Degree of protection | IP10 IP20 | ||
Note on materials | RoHS-compliant | ||
Phases of nominal operating voltage | Single-phase | ||
Permissible voltage fluctuations | +/- 10 % | ||
Nominal current | 2 A ... 3 A | ||
Max. intermediate circuit voltage DC | 320 V | ||
Pulse power, brake resistance | 2,8 kVA | ||
Permissible range for logic voltage | ± 20 % | ||
Output voltage class AC | 3x 0 - 270 V | ||
Nominal current per phase, effective | 2,5 A | ||
Max. peak current duration | 5 s | ||
Maximum output | 1.000 VA | ||
Parameterisation interface | Parameterisation and commissioning USB Ethernet | ||
Communication profile | DS301/DSP402 FHPP | ||
Max. fieldbus transmission rate | 1 Mbit/s | ||
Encoder interface output, features | Resolution 16384 ppr | ||
Encoder interface input, features | 3-phase encoder signals EnDat HIPERFACE RS422 SINCOS | ||
Number of digital logic inputs | 10 | ||
Working range of logic input | 8 V ... 30 V |