Proof test interval | 20 y | ||
SFF Safe Failure Fraction | 99,17 % | ||
Performance Level (PL) | Safe Torque Off (STO)/category 4, performance level e | ||
Safety function | Safe torque off (STO) Safe Stop 1 (SS1) | ||
Resolution of monitor outputs | 9 bit | ||
Number of analogue monitor outputs | 2 | ||
Working range setpoint input | ± 10 V | ||
Number of analogue setpoint inputs | 2 | ||
Features of digital logic outputs | Galvanically isolated Freely configurable in some cases | ||
Working range of logic input | 8 V ... 30 V | ||
Number of digital logic inputs | 10 | ||
Encoder interface input, features | 3-phase encoder signals EnDat HIPERFACE RS422 SINCOS | ||
Encoder interface output, features | Resolution 16384 ppr | ||
Max. fieldbus transmission rate | 1 Mbit/s | ||
Communication profile | DS301/DSP402 | ||
Parameterisation interface | Parameterisation and commissioning USB Ethernet | ||
Maximum output | 12.000 VA | ||
Max. peak current duration | 5 s | ||
Nominal current per phase, effective | 10 A | ||
Output voltage class AC | 3x 0 - 360 V | ||
Permissible range for logic voltage | ± 20 % | ||
Pulse power, brake resistance | 8,5 kVA | ||
Max. intermediate circuit voltage DC | 560 V | ||
Nominal current | 11 A | ||
Permissible voltage fluctuations | +/- 10 % | ||
Phases of nominal operating voltage | 3-phase | ||
Note on materials | RoHS-compliant | ||
Degree of protection | IP10 IP20 | ||
Ambient temperature | 0 °C ... 40 °C | ||
Certificate issuing authority | 01/205/5162.02/19 TÜV Rheinland | ||
Approval | RCM trademark c UL us listed (OL) | ||
Product weight | 3.800 g |
Hardware fault tolerance | 1 | ||
Diagnostic coverage | 97 % | ||
Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 3/SILCL 3 | ||
Features of monitor outputs | Short-circuit proof | ||
Working range of monitor outputs | ± 10 V | ||
Impedance of setpoint input | 20 kOhm | ||
Features of setpoint inputs | Differential inputs Configurable for speed Configurable for current | ||
Max. current digital logic outputs | 100 mA | ||
Number of digital logic outputs 24 V DC | 5 | ||
Features of logic input | Galvanically isolated Freely configurable | ||
Encoder interface input, function | Setpoint speed value as encoder signal Specifies the speed of the slave drive in synchronous mode. | ||
Encoder interface output, function | Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave drive. | ||
Bus connection | Plugs 9-pin Sub-D | ||
Process interfacing | I/O coupling For 256 position sets | ||
Fieldbus link | CANopen Modbus/TCP | ||
Output frequency | 0 Hz ... 1.000 Hz | ||
Controller nominal output | 6.000 VA | ||
Peak current per phase, effective | 20 A | ||
Nominal output current | 10 A | ||
Current consumption of logic power supply without clamping brake | 1 A | ||
Nominal voltage for logic power supply DC | 24 V | ||
Brake resistance | 68 Ohm | ||
Mains filter | Integrated | ||
Mains frequency | 50 Hz ... 60 Hz | ||
Nominal operating voltage AC | 400 V | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Pollution degree | 2 | ||
Relative air humidity | 0 - 90% | ||
Storage temperature | -25 °C ... 70 °C | ||
CE mark (see declaration of conformity) | To EU EMC Directive To EC Machinery Directive To EU Low Voltage Directive In accordance with EU RoHS Directive | ||
Display | 7-segment display | ||
Type of mounting | On sub-base Screw-clamped |