| Max. tooth force against tooth fracture (at a shock factor of 1,35) | Fz max | 26,200 | |
| Ring cross section | hA | 20 | mm |
| Diameter turning inner ring | d1 | 350 | mm |
| Pitch circle diameter gearing | d0 | 335 | mm |
| Modul of gearing | m | 5 | mm |
| Number of fixing holes in inner ring | ni | 12 | |
| Tread fixing bore | dBa | M12 | |
| Outside diameter inner ring lower tolerance | -0.50 | mm | |
| Fixing bore | dB | 18 | mm |
| Pitchcircle diameter fixing holes outer ring | La | 490 | mm |
| Max. tooth force root fatigue strenght (at a shock factor of 1,2) | Fz norm | 17,700 | |
| Diameter turning inner ring upper tolerance | 0.50 | mm | |
| Width gearing | b | 40 | mm |
| Number of teeth | z | 67 | |
| Max. radial load fixing screws (friction locking) | Fr zul | 49,600 | |
| Thread depth fixing hole | Gl | 20 | mm |
| Pitchcircle diameter fixing holes inner ring | Li | 375 | mm |
| Outside diameter inner ring | da | 412.50 | mm |
| Number of fixing holes in outer ring | na | 8 | |
| Inner diameter outer ring upper tolerance | 0.50 |
| Width inner ring | B | 44.50 | mm |
| height of flange | hf IR | 12 | mm |
| Outside diameter | D | 518 | mm |
| Bore diameter | d | 325 | mm |
| Width Outer ring | C | 44.50 | mm |
| Outside diameter lower tolerance | -0.50 | mm | |
| Height | T | 56 | mm |
