1)
Set screw M3
2)
Activation point
| Activation point (dimension "X") | 13.65 | mm |
| Functional principle | Magnetic | ||
| Load current | ≤ 20 | ||
| Connection type | Line 0.3 m and plug M8x1 3-pin with knurled screws | ||
| Short-circuit protection | ‒ | ||
| Switch-on suppression | ‒ | ||
| Pulse delay (Off delay) | ‒ | ||
| Suitable for flexing installation (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Weld spark resistant (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Cable diameter D (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | 3.2 mm ±0.2 | ||
| Bending radius, flexing (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Maximum permissible travel speed (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Permissible ambient temperature (min ... max) | -40 °C ... +85 °C | ||
| MTTFd (as per EN ISO 13849-1 ) | ‒ |
| Operating voltage | 3,8 ... 30 | ||
| Switching function | Hall PNP/normally closed (NC) | ||
| Function indication | ‒ | ||
| Reverse polarity protection | ‒ | ||
| Switching frequency | 2.50 | kHz | |
| Maximum permissible starting speed | 2 | m/s | |
| Can withstand torsion (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Cable cross-section (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | 3x0,14 | ||
| Bending radius, stationary (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Bending cycles (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Maximum permissible acceleration (Technical data only for the cast-on connection line (0.3 m) at the magnetic sensor. Even more performance, e.g. extension cables are offered for use in a cable management chain. ) | ‒ | ||
| Protection type | IP66 | ||
| Certifications and approvals | ‒ |