REXROTH R044471201 miniature runner block resist nrii

Name: R044471201 REXROTH
Brand: REXROTH
SKU: 291397-en-usd
Price: 150.36 USD
Availability: InStock

MWA-007-SLS-C1-P-3

$150.36 ~~$300.72~~ -50%

5 pcs. with 7 to 15 days delivery to United States

Specifications

High load capacity in all load directions, including moments about all axes, due to the use of largest possible ball sizes.
Size 15 and up with a lube nipples on the end face and relubrication port on the side
The runner blocks are delivered on a mounting aid.
Low friction
All steel parts of the runner block are made of rust and acid resistant material similar to ISO 683-17 / EN 10088

Series (R0444)	Slimline, long, standard height R0444
Size (7)	7 size
Preload class (1)	C1 Moderate preload

Accuracy class (2)	P Precision Accuracy Level
Seals (01)	Standard seals

Self-aligning for compensation of misalignments		Without self-alignment
Preload class		C1 moderate preload
Format		SLS - slimline, long, standard height
Footnote permissible ambient temperature (min ... max)		Brief peaks up to 100°C are permissible.
Footnote static load capacity C0		Values calculated acc. to DIN 636, part 2
Maximum permissible linear speed vmax		3 m/s
Max. acceleration amax		250 m/s²
Static longitudinal moment load capacity ML0		8.3 Nm
Dynamic longitudinal moment load capacity ML		4.3 Nm
Dynamic torsional moment load capacity Mt		4.5 Nm
Dynamic load capacity C		1220 N
Height of runner block with guide rail		8 mm
Length of runner block		33 mm

Accuracy class		P – Precise
Material (profiled rail systems)		Corrosion resistant steel
Nominal size		7
Permissible ambient temperature		-10 °C ... +80 °C
Static load rating C0		2340 N
Footnote amax		Only with pre-tensioned systems. For non-pre-tensioned systems: a_max = 50 m/s²
Static torsional moment load capacity Mt0		8.5 Nm
Dynamic longitudinal moment load capacity ML footnote		Calculated values (derived from C, C₀)
Dynamic torsional moment load capacity Mt footnote		Calculated values (derived from C, C₀)
Footnote dynamic load capacity C		Values calculated acc. to DIN 636, part 2
Lubrication		With initial lubrication and without preservation
Height of runner block		6.5 mm
Width of runner block		17 mm