1)
4 lubrication holes
2)
Sizes 7 to 12
3)
Funnel-type lube nipple
4)
Sizes 15 - 20
| S2 | M2 | ||
| A | 17 | mm | |
| A3 | 5 | mm | |
| B1 | 14.90 | mm | |
| E1 | 12 | mm | |
| H | 8 | mm | |
| H1 With longitudinal seal | - | ||
| N3 | 2.50 | mm |
| V1 | 2 | mm | |
| A2 | 7 | mm | |
| B | 24 | ||
| B2 | - | ||
| E2 | 8 | mm | |
| H1 Without longitudinal seal | 6.50 | mm | |
| K | - | ||
| N5 | - |
| amax (Only with pre-tensioned systems. For non-pre-tensioned systems: amax = 50 m/s2) | 250 | m/s² | |
| m | 9 | kg | |
| Size | 7 |
| vmax (Speeds of up to 5 m/s are possible. Service life is limited by increased wear to plastic parts. ) | 3 | m/s | |
| Operating conditions | Operating conditions | ||
| Permissible ambient temperature (min ... max) (Brief peaks up to 100°C are permissible.) | -10 °C ... +80 °C |
