| Type of actuation | Electric | ||
| Material screws | Steel | ||
| Material seals | HNBR | ||
| Pneumatic connection, port 2 | Sub-base | ||
| Type of mounting | On sub-base | ||
| Product weight | 25 g | ||
| Ambient temperature | -5 °C ... 60 °C | ||
| Permissible solenoid surface temperature | 120 °C | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Restrictions for environmental and media temperature | As a function of switching frequency (see graph) | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Note regarding operating voltage | Operation only with connecting cable MHJ9-KMH-... | ||
| Tolerance switching time on | +/-15% | ||
| Switching time off 0.6 MPa (6 bar, 87 psi) and 24 V in new condition | 0,5 ms | ||
| Switching time off 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition | 0,7 ms | ||
| Switching time off 0.4 MPa (4 bar, 58 psi)and 12 V in new condition | 0,6 ms | ||
| Switching time off 0.4 MPa (4 bar, 58 psi) and 48 V in new condition | 0,4 ms | ||
| Switching time off 0.4 MPa (4 bar, 58 psi) and 24 V in new condition | 0,5 ms | ||
| Max. switching frequency | 500 Hz | ||
| b value | 0,36 | ||
| Flow direction | Non-reversible | ||
| Manual override | None | ||
| Sealing principle | Hard | ||
| Operating conditions to DIN VDE 0580 | S3 50% 20 min. with individual valve S3 15% 20 min. with block mounting | ||
| Degree of protection | IP40 | ||
| Design | Poppet valve without spring return | ||
| Operating voltage | 24V DC | ||
| Standard nominal flow rate | 160 l/min |
| Valve function | 2/2-way, closed, monostable | ||
| Material housing | PA-reinforced | ||
| Note on materials | RoHS-compliant | ||
| Pneumatic connection, port 1 | Sub-base | ||
| Electrical connection | 2-pin Plug KMH | ||
| Max. tightening torque for valve mounting | 0,28 Nm | ||
| Media temperature | -5 °C ... 60 °C | ||
| Storage temperature | -20 °C ... 50 °C | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Note on operating and pilot medium | Lubricated operation not possible | ||
| Coil resistance R20 | 5 Ohm | ||
| Operational voltage range DC | 12 V ... 53 V | ||
| Tolerance switching time off | +15%/-25% | ||
| Switching time on 0.6 MPa (6 bar, 87 psi) and 24 V in new condition | 1,3 ms | ||
| Switching time on 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition | 0,9 ms | ||
| Switching time on 0.4 MPa (4 bar, 58 psi) and 12 V in new condition | 1,4 ms | ||
| Switching time on 0.4 MPa (4 bar, 58 psi) and 48 V in new condition | 0,8 ms | ||
| Switching time on 0.4 MPa (4 bar, 58 psi) and 24 V in new condition | 1 ms | ||
| C value | 0,66 l/sbar | ||
| Symbol | 992,259 | ||
| Type of piloting | Direct | ||
| Mounting position | optional | ||
| Note on operation | Do not operate without flow. | ||
| Grid dimension | 9,5 mm | ||
| Type of reset | Pneumatic spring | ||
| Operating pressure | 0,5 bar ... 6 bar | ||
| pneumatic working port | Sub-base | ||
| Construction width | 9 mm |
