| Fit diameter of roller stud / stud | d1 | 16 | mm |
| Speed on permanent grease lubrication | nD G | 1,600 | |
| Basic static load rating, radial | C0r | 23,400 | |
| Width | B | 52 | mm |
| Outside diameter | D | 35 | mm |
| Fatigue load limit, radial | Cur | 3,250 | |
| Basic dynamic load rating, radial | Cr | 12,700 |
| Width of flats | W | 8 | mm |
| Thread | M16X1,5 | ||
| Stop diameter of thrust washer | d2 | 27.60 | mm |
| Protrusion outer ring to thrust washer | C1 | 0.80 | mm |
| Distance to lubrication hole | Ca | 8 | mm |
| Witdh of thrust washer | B1 | 19.60 | mm |
| Thread length | IG | 17 | mm |
| Diameter lubrication hole | ds | 3 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Width, outer ring | C | 18 | mm |
| Bolt/stud length effectively | B2 | 32.50 | mm |
| Manufacturer | Part Number |
|---|---|
| NTN | KRV35 LLH/3AS (NTN) |
