| Fit diameter of roller stud / stud | d1 | 30 | mm |
| Speed on permanent grease lubrication | nD G | 2,800 | |
| Basic static load rating, radial | C0r | 23,600 | |
| Width | B | 91 | mm |
| Outside diameter | D | 80 | mm |
| Fatigue load limit, radial | Cur | 1,240 | |
| Basic dynamic load rating, radial | Cr | 30,500 |
| Radius of outer ring outside profile | R | 500 | mm |
| Thread length | IG | 32 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Protrusion outer ring to thrust washer | C1 | 1 | mm |
| Bolt/stud length effectively | B2 | 63 | mm |
| Width of flats | W | 12 | mm |
| Thread | M30X1,5 | ||
| Stop diameter of thrust washer | d2 | 42.40 | mm |
| Width, outer ring | C | 27 | mm |
| Maximum witdh of thrust washer | B1 | 28 | mm |
