| Fit diameter of roller stud / stud | d1 | 18 | mm |
| Speed on permanent grease lubrication | nD G | 5,500 | |
| Basic static load rating, radial | C0r | 8,500 | |
| Width | B | 58.80 | mm |
| Outside diameter | D | 47 | mm |
| Fatigue load limit, radial | Cur | 425 | N |
| Basic dynamic load rating, radial | Cr | 12,700 |
| Radius of outer ring outside profile | R | 500 | mm |
| Thread length | IG | 21 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Protrusion outer ring to thrust washer | C1 | 0.80 | mm |
| Bolt/stud length effectively | B2 | 40.50 | mm |
| Width of flats | W | 8 | mm |
| Thread | M18X1,5 | ||
| Stop diameter of thrust washer | d2 | 22.90 | mm |
| Width, outer ring | C | 17.50 | mm |
| Maximum witdh of thrust washer | B1 | 18.50 | mm |
