| Material cylinder barrel | Wrought aluminium alloy Smooth anodised | ||
| Material spindle nut | Steel | ||
| Material housing | Wrought aluminium alloy Smooth anodised | ||
| Note on materials | RoHS-compliant | ||
| Electrical connector system | Plug | ||
| Basic weight for 0 mm stroke | 615 g | ||
| Moving mass for 0 mm stroke | 70 g | ||
| Mass moment of inertia JO | 0,023 kgcm² | ||
| Mass moment of inertia JH per metre of stroke | 0,026 kgcm² | ||
| Reference value effective load, horizontal | 8 kg | ||
| Max. moment Mz | 0,6 Nm | ||
| Max. moment Mx | 0 Nm | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Relative air humidity | 0 - 85% Non-condensing | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
| Approval | RCM trademark c UL us - Recognized (OL) | ||
| Nominal operating voltage DC | 24 V | ||
| Duty cycle | 100% | ||
| Max. speed | 0,3 m/s | ||
| Rotor position sensor, encoder measuring principle | Optical | ||
| Rotor position sensor | Incremental encoder | ||
| Spindle type | Ball screw drive | ||
| Type of motor | Stepper motor | ||
| Mounting position | optional | ||
| Spindle pitch | 8 mm/U | ||
| Stepping angle tolerance | ±5% | ||
| Reversing backlash theoretical | 100 µm | ||
| Stroke reserve | 0 mm | ||
| Size | 16 |
| Material spindle | Rolled steel | ||
| Material piston rod | High-alloy stainless steel | ||
| Material cover | Wrought aluminium alloy Smooth anodised | ||
| Type of mounting | Via female thread With accessories | ||
| Additional weight per 10 mm stroke | 17 g | ||
| Additional moving mass per 10 mm stroke | 2 g | ||
| Bending radius, fixed cable | ≥ 60 mm | ||
| Mass moment of inertia JL per kg of working load | 0,016 kgcm² | ||
| Reference value effective load, vertical | 4 kg | ||
| Max. feed force Fx | 50 N | ||
| Max. moment My | 0,6 Nm | ||
| Impact energy in end positions | 0 J | ||
| Degree of protection | IP40 | ||
| Storage temperature | -20 °C ... 60 °C | ||
| Corrosion resistance class CRC | 1 - Low corrosion stress | ||
| CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
| Nominal motor current | 1,4 A | ||
| Insulation protection class | B | ||
| Repetition accuracy | ±0.02 mm | ||
| Max. acceleration | 10 m/s² | ||
| Rotor position encoder interface | RS422 TTL AB channels + zero index | ||
| Protection against torque/guide | With plain-bearing guide | ||
| Design | Electric cylinder With ball screw drive | ||
| Piston-rod end | Male thread | ||
| Torsional backlash at piston rod +/- | 2 deg | ||
| Spindle diameter | 8 mm | ||
| Stepper angle for complete step | 1,8 deg | ||
| Piston rod thread | M6 | ||
| Stroke | 100 mm |
