Festo 1470704 electric drive

Name: 1470704 Festo
Brand: Festo
SKU: 686629-en-usd
Price: 1535.98 USD
Availability: SoldOut

EPCO-25-200-3P-ST-E

$1,535.98 Limited stock only available on quotation

Specifications

Series (EPCO)	Electric cylinder, with spindle drive
Size (25)	25
Stroke [mm] (200)	200
Spindle pitch (3P)	3 mm
Piston rod thread type	Male thread
Piston rod extension	None
Position sensing	None
Motor type (ST)	Stepper motor ST

Measuring unit (E)	Encoder
Brake	None
Cable outlet direction	Standard
Guide unit	None
Connecting cable to motor controller	None
Controller type	None
Bus protocol/activation	None
Switching input/output	None

Mass moment of inertia JH per metre of stroke		0,049 kgcm²
Mass moment of inertia JO		0,093 kgcm²
Additional moving mass per 10 mm stroke		2,6 g
Additional weight per 10 mm stroke		34 g
Type of mounting		Via female thread With accessories
Material cover		Wrought aluminium alloy Smooth anodised
Material piston rod		High-alloy stainless steel
Material spindle		Rolled steel
Size		25
Stroke reserve		0 mm
Reversing backlash theoretical		100 µm
Stepping angle tolerance		±5%
Spindle pitch		3 mm/U
Mounting position		optional
Type of motor		Stepper motor
Spindle type		Ball screw drive
Rotor position sensor		Incremental encoder
Rotor position sensor, encoder measuring principle		Optical
Max. speed		0,15 m/s
Duty cycle		100%
Nominal operating voltage DC		24 V
Approval		RCM trademark c UL us - Recognized (OL)
CE marking (see declaration of conformity)		To UK instructions for EMC To UK RoHS instructions
LABS (PWIS) conformity		VDMA24364 zone III
Relative air humidity		0 - 85% Non-condensing
Ambient temperature		0 °C ... 50 °C
Max. moment Mx		0 Nm
Max. moment Mz		1 Nm
Reference value effective load, horizontal		60 kg

Mass moment of inertia JL per kg of working load		0,002 kgcm²
Moving mass for 0 mm stroke		145 g
Basic weight for 0 mm stroke		1.125 g
Electrical connector system		Plug
Note on materials		RoHS-compliant
Material housing		Wrought aluminium alloy Smooth anodised
Material spindle nut		Steel
Material cylinder barrel		Wrought aluminium alloy Smooth anodised
Stroke		200 mm
Piston rod thread		M8
Stepper angle for complete step		1,8 deg
Spindle diameter		10 mm
Torsional backlash at piston rod +/-		1,5 deg
Piston-rod end		Male thread
Design		Electric cylinder With ball screw drive
Protection against torque/guide		With plain-bearing guide
Rotor position encoder interface		RS422 TTL AB channels + zero index
Max. acceleration		10 m/s²
Repetition accuracy		±0.02 mm
Insulation protection class		B
Nominal motor current		3 A
CE mark (see declaration of conformity)		To EU EMC Directive In accordance with EU RoHS Directive
Corrosion resistance class CRC		1 - Low corrosion stress
Storage temperature		-20 °C ... 60 °C
Degree of protection		IP40
Impact energy in end positions		0 J
Max. moment My		1 Nm
Max. feed force Fx		350 N
Reference value effective load, vertical		30 kg