| Note on materials | RoHS-compliant | ||
| Material drive cover | Painted die cast aluminium | ||
| Material guide rail | Steel | ||
| Material spindle nut | Steel | ||
| Working stroke | 100 mm | ||
| Stroke reserve | 0 mm | ||
| Spindle pitch | 8 mm/U | ||
| Guide | Recirculating ball bearing guide | ||
| Type of motor | Stepper motor Servo motor | ||
| Symbol | 00991211 | ||
| Max. rotational speed | 4.500 rpm | ||
| Repetition accuracy | ±0.015 mm | ||
| Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
| Degree of protection | IP40 | ||
| 2nd moment of area Iy | 38.000 mm⁴ | ||
| Max. force Fy | 150 N | ||
| Fy at theoretical life value of 100 km (only guide consideration) | 552 N | ||
| Max. moment Mx | 1,3 Nm | ||
| Max. moment Mz | 1,1 Nm | ||
| My at theoretical life value of 100 km (only guide consideration) | 4 Nm | ||
| Max. feed force Fx | 40 N | ||
| Mass moment of inertia JH per metre of stroke | 0,022 kgcm² | ||
| Mass moment of inertia JO | 0,003 kgcm² | ||
| Moving mass | 83,4 g | ||
| Dynamic deflection (moving load) | 0.05% of the axis length, max. 0.5 mm | ||
| Interface code, actuator | V25 | ||
| Material profile | Anodised wrought aluminium alloy | ||
| Material cover tape | High-alloy stainless steel |
| Idle torque at vmax | 0,04 Nm | ||
| Material guide slide | Steel | ||
| Material slide | Die-cast aluminium | ||
| Material spindle | Steel | ||
| Size | 32 | ||
| Spindle diameter | 8 mm | ||
| Mounting position | optional | ||
| Design | Electromechanical linear axis With ball screw | ||
| Spindle type | Ball screw drive | ||
| Max. acceleration | 15 m/s² | ||
| Max. speed | 0,6 m/s | ||
| LABS (PWIS) conformity | VDMA24364 zone III | ||
| Cleanroom class | Class 7 according to ISO 14644-1 | ||
| Ambient temperature | 0 °C ... 50 °C | ||
| Idle torque at vmin | 0,02 Nm | ||
| Max. force Fz | 300 N | ||
| Fz at theoretical life value of 100 km (only guide consideration) | 1.104 N | ||
| Max. moment My | 1,1 Nm | ||
| Mx at theoretical life value of 100 km (only guide consideration) | 5 Nm | ||
| Mz at theoretical life value of 100 km (only guide consideration) | 4 Nm | ||
| Torsional mass moment of inertia It | 1.700 mm⁴ | ||
| Mass moment of inertia JL per kg of working load | 0,016 kgcm² | ||
| Feed constant | 8 mm/U | ||
| Additional weight per 10 mm stroke | 18 g | ||
| Static deflection (load in standstill) | 0.1% of the axis length | ||
| Material end cap | Painted die cast aluminium | ||
| 2nd moment of area Iz | 45.000 mm⁴ |
