Stroke reserve | 0 mm | ||
Working stroke | 100 mm | ||
Material spindle nut | Rolled steel | ||
Material piston rod | High-alloy stainless steel | ||
Material housing | Anodised wrought aluminium alloy | ||
Material guide slide | Rolled steel | ||
Type of mounting | Via female thread Via centring sleeve With accessories Via cylindrical pin | ||
Logic interface, number of pins/wires | 8 | ||
Logic interface, connection type | Plug | ||
Switching logic for inputs | PNP (positive switching) | ||
Max. cable length | 15 m outputs 15 m inputs 20 m with IO-Link® operation | ||
IO-Link, Min. cycle time | 1 ms | ||
IO-Link, Process data content IN | 1-bit (state device) 1-bit (state move) 1-bit (state in) 1-bit (state out) | ||
IO-Link, Process data content OUT | 1-bit (move in) 1-bit (move out) 1-bit (quit error) | ||
IO-Link, Number of ports | 1 | ||
IO-Link, communication mode | COM3 (230.4 kBaud) | ||
Features of logic input | Configurable Not galvanically isolated | ||
Working range of logic input | 24 V | ||
Number of digital logic inputs | 2 | ||
Additional weight per 10 mm stroke | 30 g | ||
Product weight | 1.225 g | ||
Moving mass for 0 mm stroke | 149 g | ||
Reference value operational performance | 5.000 km | ||
Feed constant | 8 mm/U | ||
Static basic load rating ball screw | 3.700 N | ||
Reference value effective load, horizontal | 2 kg | ||
Max. radial force at drive shaft | 140 N | ||
Max. moment My | 3,17 Nm | ||
Max. force Fz | 991 N | ||
Dynamic basic load rating ball screw | 2.000 N | ||
Dynamic basic load rating fixed bearing | 3.795 N | ||
Ambient temperature | 0 °C ... 50 °C | ||
Degree of protection | IP40 | ||
Storage temperature | -20 °C ... 60 °C | ||
Corrosion resistance class CRC | 0 - No corrosion stress | ||
Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 | ||
CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
Approval | RCM trademark | ||
Power supply, number of pins/wires | 4 | ||
Power supply, connection type | Plugs | ||
Rotor position transducer resolution | 16 bit | ||
Nominal current | 3 A | ||
Max. current consumption | 3.000 mA | ||
Insulation protection class | B | ||
Features of digital logic outputs | Configurable Not galvanically isolated | ||
Max. speed | 0,19 m/s | ||
Ready status indication | LED | ||
Additional functions | User interface Integrated end-position sensing | ||
Rotor position sensor | Absolute single-turn encoder | ||
Symbol | 00997294 | ||
Referencing | Positive fixed stop block Negative fixed stop block Reference switch | ||
Design | Electric mini slide With ball screw drive With integrated drive | ||
Mounting position | optional | ||
Spindle diameter | 8 mm |
Size | 32 | ||
Material spindle | Rolled steel | ||
Material slide | Anodised wrought aluminium alloy | ||
Material yoke plate | Anodised wrought aluminium alloy | ||
Material guide rail | Rolled steel | ||
Note on materials | RoHS-compliant | ||
Logic interface, plug pattern | 00992264 | ||
Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 | ||
IO-Link, connection technology | Plugs | ||
Switching logic for outputs | PNP (positive switching) | ||
IO-Link, Data storage required | 500 Byte | ||
IO-Link, Service data IN | 32-bit force 32-bit position 32-bit speed | ||
IO-Link, Process data length IN | 2 bytes | ||
IO-Link, Process data length OUT | 2 bytes | ||
IO-Link, Port class | A | ||
IO-Link, Protocol version | Device V 1.1 | ||
IO-Link, SIO-Mode support | Yes | ||
Specification logic input | Based on IEC 61131-2, type 1 | ||
Number of digital logic outputs 24 V DC | 2 | ||
Basic weight for 0 mm stroke | 924 g | ||
Additional moving mass per 10 mm stroke | 12 g | ||
Maintenance interval | Life-time lubrication | ||
Static basic load rating fixed bearing | 1.792 N | ||
Static basic load rating linear guide | 3.880 N | ||
Reference value effective load, vertical | 2 kg | ||
Max. feed force Fx | 60 N | ||
Max. moment Mz | 3,17 Nm | ||
Max. moment Mx | 3,4 Nm | ||
Max. force Fy | 991 N | ||
Dynamic basic load rating linear guide | 2.135 N | ||
Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C. | ||
Protection class | III | ||
Relative air humidity | 0 - 90% | ||
LABS (PWIS) conformity | VDMA24364 zone III | ||
Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 | ||
CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
KC mark | KC-EMV | ||
Power supply, connection pattern | 00995989 | ||
power supply, connection system | M12x1, T-coded according to EN 61076-2-111 | ||
Permissible voltage fluctuations | +/- 15% | ||
Parameterisation interface | IO-Link User interface | ||
Nominal voltage DC | 24 V | ||
Max. current digital logic outputs | 100 mA | ||
Duty cycle | 100% | ||
Repetition accuracy | ±0.015 mm | ||
Max. acceleration | 5 m/s² | ||
Display | LED | ||
Rotor position sensor, encoder measuring principle | Magnetic | ||
Position detection | Motor encoder Via proximity switch | ||
Spindle type | Ball screw drive | ||
Type of motor | Stepper motor | ||
Guide | Recirculating ball bearing guide | ||
Spindle pitch | 8 mm/U | ||
Reversing backlash theoretical | 150 µm |