| Outer chamfer, lower tolerance | fUT | -0.40 | mm |
| Flange thickness, lower tolerance | sfl UT | -0.20 | mm |
| Width, lower tolerance | BUT | -0.25 | mm |
| Outside diameter, lower tolerance | Do UT | 0.07 | mm |
| Outside diameter, upper tolerance | Do OT | 0.11 | mm |
| Wall thickness | s3 | 2 | mm |
| Inner edge break, max. | Fi max | 0.70 | mm |
| Radius, max. | Rmax | 2 | mm |
| Outer chamfer, upper tolerance | fOT | 0.40 | mm |
| Flange thickness, upper tolerance | sfl OT | 0.05 | mm |
| Width, upper tolerance | BOT | 0.25 | mm |
| Outside diameter of flange, lower tolerance | Dfl UT | -0.50 | mm |
| Outside diameter of flange, upper tolerance | Dfl OT | 0.50 | mm |
| Inner edge break, min. | Fi min | 0.10 | mm |
| Outer chamfer | f | 1.20 | mm |
| Flange thickness | sfl | 2 | mm |
| Basic static load rating, axial | C0a | 62,800 | |
| Basic static load rating, radial | C0r | 165,000 | |
| Width | B | 26 | mm |
| Outer diameter | Do | 34 | mm |
| Basic dynamic load rating, axial | Ca | 35,200 | |
| Basic dynamic load rating, radial | Cr | 92,400 | |
| Outside diameter of flange | Dfl | 42 | mm |
| Inner diameter | Di | 30 | mm |
