| Inner edge break | Fi | 0.10 | mm |
| Outer chamfer, upper tolerance | fOT | 0.40 | mm |
| Width, lower tolerance | BUT | -0.25 | mm |
| Wall thickness, upper tolerance | s3 OT | 0.01 | mm |
| Outside diameter, lower tolerance | Do UT | 0.06 | mm |
| Inner edge break, max. | Fi max | 0.70 | mm |
| Outer chamfer | f | 0.60 | mm |
| Outer chamfer, lower tolerance | fUT | -0.40 | mm |
| Width, upper tolerance | BOT | 0.25 | mm |
| Wall thickness, lower tolerance | s3 UT | -0.03 | mm |
| Wall thickness | s3 | 1.50 | mm |
| Outside diameter, upper tolerance | Do OT | 0.10 | mm |
| Inner edge break, min. | Fi min | 0.10 | mm |
| Inner diameter | Di | 20 | mm |
| Basic static load rating, radial | C0r | 75,000 | |
| Width | B | 15 | mm |
| Basic dynamic load rating, radial | Cr | 42,000 | |
| Outer diameter | Do | 23 | mm |
