| Inner edge break | Fi | 0.20 | mm |
| Outer chamfer, upper tolerance | fOT | 0.60 | mm |
| Width, lower tolerance | BUT | -0.25 | mm |
| Wall thickness, upper tolerance | s3 OT | -0.04 | mm |
| Outside diameter, lower tolerance | Do UT | 0.10 | mm |
| Inner edge break, max. | Fi max | 1 | mm |
| Outer chamfer | f | 1.80 | mm |
| Outer chamfer, lower tolerance | fUT | -0.60 | mm |
| Width, upper tolerance | BOT | 0.25 | mm |
| Wall thickness, lower tolerance | s3 UT | -0.09 | mm |
| Wall thickness | s3 | 2.50 | mm |
| Outside diameter, upper tolerance | Do OT | 0.17 | mm |
| Inner edge break, min. | Fi min | 0.20 | mm |
| Inner diameter | Di | 120 | mm |
| Basic static load rating, radial | C0r | 1,800,000 | |
| Width | B | 60 | mm |
| Basic dynamic load rating, radial | Cr | 1,010,000 | |
| Outer diameter | Do | 125 | mm |
