8148393 Festo

FESTO 8148393 servo motor

Name: 8148393 FESTO
Brand: FESTO
SKU: 711952-en-usd
Price: 11379.42 USD
Availability: InStock

EMMT-AS-190-L-HT-R3SB

$11,379.42 ~~$22,758.84~~ -50%

1 pcs. with 3 to 4 week lead time shipping to United States

Specifications

Series (EMMT)	Servo motor
Motor type (AS)	AC synchronous
Flange size, motors [mm] (190)	190
Length (L)	Long
Output shaft	Smooth shaft

Radial shaft seal	None
Winding (HT)	High voltage, torque optimised
Electrical connection (R3)	Angled plug M40, rotatable
Measuring unit (S)	Absolute encoder, single turn
Brake (B)	With brake

Technical data

Total mass moment of inertia of output		195 kgcm²
Permissible axial shaft load		520 N
Rotor position sensor		Absolute single-turn encoder
rotor position sensor, absolute detectable revolutions		1
Rotor position sensor, encoder measuring principle		Inductive
rotor position sensor, DC operating voltage range		3,6 V ... 14 V
Rotor position transducer resolution		19 bit
Note on ambient temperature		Up to 80°C with derating of -1.5% per degree Celsius
Note on max. installation height		As of 1,000 m: only with derating of -1.0% per 100 m
Relative air humidity		0 - 90%
Temperature class as per EN 60034-1		F
Rating class as per EN 60034-1		S1
Motor type to EN 60034-7		IM B5 IM V1 IM V3
Degree of protection		IP21
Concentricity, coaxiality, axial runout to DIN SPEC 42955		N
Detent torque		<1.0% of the peak torque
Interface code, motor out		190B
Electrical connection 1, connector system		M40x1
Electrical connection 1, connection pattern		00997380
Note on materials		RoHS-compliant
LABS (PWIS) conformity		VDMA24364 zone III
Shock resistance		As per EN 60068-2-29 15 g/11 ms to EN 60068-2-27
CE mark (see declaration of conformity)		To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive
Nominal operating voltage DC		680 V
Number of pole pairs		5
Nominal torque		82,4 Nm
Nominal rotary speed		1.000 rpm
Max. mechanical speed		8.000 rpm
Continuous stall current		22,8 A
Peak current		49,7 A
Standstill torque constant		4,79 Nm/A
Phase-phase winding resistance		0,358 Ohm
Winding longitudinal inductivity Ld (phase)		6,95 mH
Electric time constant		38,8 ms
Thermal resistance		0,3 K/W
rotor position sensor, system accuracy of angle measurement		-65 arcsec ... 65 arcsec
Operating voltage DC for brake		24 V
Power consumption, brake		50 W
Brake closing time		65 ms
Max. brake no-load speed		8.000 rpm
Switching cycles holding brake		5 million idle actuations (without friction work!)
Mean time to dangerous failure (MTTFd), subcomponent		380 years, rotor position sensor

Product weight		61.500 g
Permissible radial shaft load		2.620 N
rotor position sensor, manufacturer designation		ECI 1319
Rotor position encoder interface		EnDat® 22
rotor position sensor, DC operating voltage		5 V
rotor position sensor, position values per revolution		524.288
Ambient temperature		-15 °C ... 40 °C
Max. installation height		4.000 m
Storage temperature		-20 °C ... 70 °C
Conforms to standard		IEC 60034
Max. winding temperature		155 °C
Temperature monitoring		Digital motor temperature transmission via EnDat® 2.2
Mounting position		optional
Note on degree of protection		IP21 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components
Balance quality		G 2.5
Storage lifetime under nominal conditions		20.000 h
Electrical connection 1, connection type		Hybrid plug
Electrical connection 1, number of connections/cores		15
Pollution degree		2
Corrosion resistance class CRC		0 - No corrosion stress
Vibration resistance		As per EN 60068-2-6
Approval		RCM trademark
CE marking (see declaration of conformity)		To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions
Type of winding switch		Star inside
Standstill torque		93,7 Nm
Peak torque		183,3 Nm
Max. rotational speed		1.654 rpm
Nominal power rating of motor		8.629 W
Nominal motor current		20 A
Motor constant		4,12 Nm/A
Voltage constant, phase-to-phase		289,7 mVmin
Phase-phase winding inductance		13,8 mH
Winding cross inductivity Lq (phase)		6,9 mH
Thermal time constant		80 min
Measuring flange		450 x 450 x 30 mm, steel
Brake holding torque		115 Nm
Brake current consumption		2,08 A
Brake separation time		190 ms
DC brake response delay		12 ms
Mass moment of inertia of brake		50 kgcm²
Mean time to failure (MTTF), subcomponent		190 years, rotor position sensor
Energy efficiency		ENEFF (CN) / Class 1