5242219 Festo

FESTO 5242219 servo motor

Name: 5242219 FESTO
Brand: FESTO
SKU: 686101-en-usd
Price: 1668.23 USD
Availability: InStock

EMMT-AS-60-L-HS-RMB

$1,668.23 ~~$3,336.46~~ -50%

2 pcs. with 1 to 3 days delivery to United States

Specifications

Series (EMMT)	Servo motor
Motor type (AS)	AC synchronous
Flange size, motors [mm] (60)	60
Length (L)	Long
Output shaft	Smooth shaft

Radial shaft seal	None
Winding (HS)	High voltage, standard
Electrical connection (R)	Angled plug, rotatable
Measuring unit (M)	Absolute encoder, multi-turn
Brake (B)	With brake

Technical data

Nominal rotary speed		3.000 rpm
Note on ambient temperature		Up to 80°C with derating of -1.5% per degree Celsius
Note on max. installation height		As of 1,000 m: only with derating of -1.0% per 100 m
Relative air humidity		0 - 90%
Temperature class as per EN 60034-1		F
Rating class as per EN 60034-1		S1
Motor type to EN 60034-7		IM B5 IM V1 IM V3
Degree of protection		IP40
Concentricity, coaxiality, axial runout to DIN SPEC 42955		N
Detent torque		<1.0% of the peak torque
Interface code, motor out		60P
Electrical connection 1, connector system		M23x1
Electrical connection 1, connection pattern		995,913
Note on materials		RoHS-compliant
LABS (PWIS) conformity		VDMA24364 zone III
Shock resistance		Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
CE mark (see declaration of conformity)		To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive
Certificate issuing authority		UL E342973
Type of winding switch		Star inside
Standstill torque		1,56 Nm
Peak torque		5,6 Nm
Max. mechanical speed		16.000 rpm
Continuous stall current		3,5 A
Peak current		18,3 A
Standstill torque constant		0,52 Nm/A
Phase-phase winding resistance		2,68 Ohm
Winding longitudinal inductivity Ld (phase)		5 mH
Electric time constant		3 ms
Thermal resistance		1,2 K/W
Total mass moment of inertia of output		0,49 kgcm²
Permissible axial shaft load		70 N
Rotor position sensor		Absolute multi-turn encoder
rotor position sensor, absolute detectable revolutions		4.10
Rotor position sensor, encoder measuring principle		Inductive
rotor position sensor, DC operating voltage range		3,6 V ... 14 V
Rotor position transducer resolution		19 bit
Brake holding torque		2,5 Nm
Brake current consumption		0,46 A
Brake coil resistance		52,4 Ohm
Brake separation time		≤ 35 ms
DC brake response delay		≤ 2 ms
Brake max. friction work		5.600 J
Switching cycles holding brake		10 million idle actuations (without friction work!)
Mean time to dangerous failure (MTTFd), subcomponent		380 years, rotor position sensor

Ambient temperature		-15 °C ... 40 °C
Max. installation height		4.000 m
Storage temperature		-20 °C ... 70 °C
Conforms to standard		IEC 60034
Max. winding temperature		155 °C
Temperature monitoring		Digital motor temperature transmission via EnDat® 2.2
Mounting position		optional
Note on degree of protection		IP40 for motor shaft without rotary shaft seal IP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components
Balance quality		G 2.5
Storage lifetime under nominal conditions		20.000 h
Electrical connection 1, connection type		Hybrid plug
Electrical connection 1, number of connections/cores		15
Pollution degree		2
Corrosion resistance class CRC		0 - No corrosion stress
Vibration resistance		Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Approval		RCM trademark c UL us - Recognized (OL)
CE marking (see declaration of conformity)		To UK instructions for EMC To UK regulations for electrical equipment To UK RoHS instructions
Nominal operating voltage DC		565 V
Number of pole pairs		5
Nominal torque		1,3 Nm
Max. rotational speed		11.900 rpm
Nominal power rating of motor		410 W
Nominal motor current		3 A
Motor constant		0,44 Nm/A
Voltage constant, phase-to-phase		31,2 mVmin
Phase-phase winding inductance		12 mH
Winding cross inductivity Lq (phase)		6 mH
Thermal time constant		44 min
Measuring flange		250 x 250 x 15 mm, steel
Product weight		2.230 g
Permissible radial shaft load		350 N
rotor position sensor, manufacturer designation		EQI 1131
Rotor position encoder interface		EnDat® 22
rotor position sensor, DC operating voltage		5 V
rotor position sensor, position values per revolution		524.29
rotor position sensor, system accuracy of angle measurement		-120 arcsec ... 120 arcsec
Operating voltage DC for brake		24 V
Power consumption, brake		11 W
Brake coil inductivity		700 mH
Brake closing time		10 ms
Max. brake no-load speed		10.000 rpm
Mass moment of inertia of brake		0,074 kgcm²
Mean time to failure (MTTF), subcomponent		190 years, rotor position sensor