Festo 8074287


Limited stock only available on quotation


Pneumatic connection Operating Pressure Mounting Position Actuation Type Dimensions Weight
G1/8 0 bar ... 13 bar optional Electric 42.2 x 95.3 x 94.3 mm 365 370
Sealing principle Soft
Nominal size, exhaust 5 mm
Material seals HNBR PTFE
Note on materials RoHS-compliant
Pneumatic connection, port 3 G1/8
Pneumatic connection, port 1 G1/8
Electrical connection 1, tightening torque 1,5 Nm
Electrical connection 1, number of connections/cores 5
Electrical connection 1, connection type Plugs
Temperature cooefficient 0,02 %/K
Reproducibility 0,4 %FS
Linearity 0,9 %FS
Sound power level at a distance of 1 m 51,9 dB(A)
Instructions on use The product is suitable for industrial purposes only. Measures to eliminate radio interference may be required in residential areas.
Climatic category 3K3 as per EN 60721
Ambient temperature 0 °C ... 50 °C
Media temperature 0 °C ... 50 °C
LABS (PWIS) conformity VDMA24364-B1/B2-L
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
CE marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions
KC mark KC-EMV
Note on operating and pilot medium Lubricated operation not possible
Accuracy analogue output in ± %FS 1 %FS
Max. load resistance current output 500 Ohm
Max. output current 25 mA
Nominal operating voltage DC 24 V
Standard nominal flow rate 2-3 20 l/min ... 850 l/min
Burst pressure 40 bar
Inlet pressure 1 0 MPa ... 1,3 MPa
Operating pressure 0 bar ... 13 bar
Display size 1.77"
Valve function 3-way proportional pressure regulator
Dimensions (W x L x H) 42.2 x 95.3 x 94.3 mm
Reverse polarity protection For all electrical connections
Safety instructions Safety position VPPI, normally closed Safety position VPPI, normally open
Setpoint value input 0 - 10 V 4 - 20 mA PWM Digital
Short circuit current rating For all electrical connections
Mounting position optional
Total leakage 5 l/h
Type of actuation Electric
Nominal size, supply 5 mm
Material housing PA-reinforced
Max. tightening torque for fitting 8,5 Nm
Pneumatic connection, port 2 G1/8
Type of mounting Via through-hole for M4 screw With H-rail
Electrical connection 1, connection pattern 00994083
Electrical connection 1, connector system M12x1, A-coded to EN 61076-2-101
Electrical connection 1, function Actual value output Setpoint input Power supply
Total accuracy 1.1%FS
Hysteresis 0,4 %FS
Product weight 365 g ... 370 g
Sound power level 62,5 dB(A)
Nominal altitude of use < 3000 m NHN
Storage temperature -20 °C ... 70 °C
Degree of protection IP65
Suitable for use with food See supplementary material information
Corrosion resistance class CRC 2 - Moderate corrosion stress
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
CE mark (see declaration of conformity) To EU EMC Directive In accordance with EU RoHS Directive
Approval RCM trademark
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases
Min. load resistance voltage output 2 kOhm
Signal range analogue output 0 - 10 V 4 - 20 mA
Switching output Push-pull
Operational voltage range DC 21,6 V ... 27,6 V
Standard nominal flow rate 150 l/min ... 1.630 l/min
Input pressure 3 -1 bar ... 0 bar
Pressure regulation range -1 bar ... 12 bar
Display resolution 128x160 pixels
Display type LED TFT colour
Type of piloting Direct
Type of reset Mechanical spring
Symbol 00997299 00997300
Input resistance 0,3 kOhm ... 100 kOhm
Max. cable length 30 m
Design Poppet valve with spring return
Flow direction Non-reversible
Stock Ask for quotation
Part number 8074287
Manufacturer Festo
Quantity Unit Price
1+ -
  • Open Registration
    Create your account instantly
  • Support 24/7
    Ask us anytime
  • 100% Safety
    Only secure payments: bank transfer, credit card and PayPal
  • Volume Discounts
    Optimize your supplies