| Material cylinder barrel | High-alloy stainless steel | ||
| Material cover | High-alloy stainless steel | ||
| Pneumatic connection | M5 | ||
| Additional weight per 10 mm stroke | 5 g | ||
| Additional moving mass per 10 mm stroke | 2 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 121 N | ||
| Ambient temperature | -40 °C ... 120 °C | ||
| Corrosion resistance class CRC | 3 - high corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db | ||
| ATEX category dust | II 2D | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) | ||
| Mode of operation | Double-acting | ||
| Variants | Hard scraper For unlubricated operation Increased chemical resistance Extended male piston rod thread Extended piston rod Bearing cap without mounting thread Lateral supply port Through piston rod Heat-resistant seals max. 120°C Temperature range -40 to 80°C Piston rod at one end | ||
| Design | Piston Piston rod Cylinder barrel | ||
| Mounting position | optional | ||
| Based on standard | ISO 6432 | ||
| Piston diameter | 16 mm |
| Material piston rod | High-alloy stainless steel | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Type of mounting | With accessories | ||
| Basic weight for 0 mm stroke | 130 g | ||
| Moving mass for 0 mm stroke | 21 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 104 N | ||
| Suitable for use with food | See supplementary material information | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion ambient temperature | -20°C <= Ta <= +60°C | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb | ||
| ATEX category gas | II 2G | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Operating pressure | 1 bar ... 10 bar | ||
| Position detection | Via proximity switch | ||
| Piston-rod end | Male thread | ||
| Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning | ||
| Piston rod thread | M6 | ||
| Stroke | 1 mm ... 200 mm |
