| Material cylinder barrel | Wrought aluminium alloy Smooth anodised | ||
| Material cover | Aluminium Anodised | ||
| Pneumatic connection | M5 | ||
| Additional weight per 10 mm stroke | 21 g | ||
| Additional moving mass per 10 mm stroke | 6 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 152 N | ||
| Ambient temperature | -20 °C ... 120 °C | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Operating pressure | 1 bar ... 10 bar | ||
| Position detection | Via proximity switch | ||
| Mounting position | optional | ||
| Based on standard | ISO 21287 | ||
| Stroke | 1 mm ... 25 mm |
| Material piston rod | High-alloy steel | ||
| Note on materials | RoHS-compliant | ||
| Type of mounting | With through-hole Via female thread With accessories Either: | ||
| Basic weight for 0 mm stroke | 131 g | ||
| Moving mass for 0 mm stroke | 30 g | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 105 N | ||
| LABS (PWIS) conformity | VDMA24364-B1/B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Single-acting Pushing Pulling | ||
| Variants | Improved running performance Extended male piston rod thread Custom thread on the piston rod Extended piston rod With protection against rotation Heat-resistant seals max. 120°C Laser etched rating plate Pulling Piston rod at one end | ||
| Design | Piston Piston rod Profile barrel | ||
| Cushioning | Elastic cushioning rings/plates at both ends | ||
| Piston diameter | 20 mm |
