| Material housing | Aluminium Anodised | ||
| Material cover | Die-cast aluminium Coated | ||
| alternative connections | See product drawing | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 3.016 N | ||
| Ambient temperature | -10 °C ... 60 °C | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Explosion ambient temperature | -10°C <= Ta <= +60°C | ||
| ATEX category gas | II 2G | ||
| CE marking (see declaration of conformity) | To UK EX instructions | ||
| Mode of operation | Double-acting | ||
| Variants | Supply port at both ends Standard slide | ||
| Coupling design | Positive-locking (slot) | ||
| Mounting position | optional | ||
| Piston diameter | 80 mm |
| Material seals | NBR TPE-U(PU) | ||
| Pneumatic connection | G1/2 | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 3.016 N | ||
| Cushioning length | 83 mm | ||
| Corrosion resistance class CRC | 0 - No corrosion stress 1 - Low corrosion stress 2 - Moderate corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] | ||
| Explosion ignition protection type for gas | Ex h IIC T4 Gb X | ||
| Explosion protection | Zone 1 (ATEX) Zone 2 (ATEX) | ||
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) | ||
| Operating pressure | 1,5 bar ... 8 bar | ||
| Position detection | Via proximity switch | ||
| Guide | Plain-bearing guide Basic guide Recirculating ball bearing guide | ||
| Cushioning | Pneumatic cushioning, adjustable at both ends Shock absorber, hard characteristic curve | ||
| Stroke | 10 mm ... 3.000 mm |
