| Material cylinder barrel | Wrought aluminium alloy | ||
| Material housing | Wrought aluminium alloy | ||
| Note on materials | RoHS-compliant | ||
| Type of mounting | With through-hole Via female thread Either: | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 483 N | ||
| Impact energy in end positions | 0,4 J | ||
| Suitable for use with food | See supplementary material information | ||
| Corrosion resistance class CRC | 3 - high corrosion stress | ||
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Operating pressure | 2 bar ... 12 bar | ||
| Position detection | Via proximity switch | ||
| Guide | Plain-bearing guide | ||
| Cushioning | Elastic cushioning rings/plates at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends | ||
| Piston diameter | 32 mm |
| Material piston rod | High-alloy stainless steel | ||
| Material guide rod | High-alloy stainless steel | ||
| Pneumatic connection | G1/8 | ||
| Torsional backlash | 0,098 deg | ||
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N | ||
| Ambient temperature | -20 °C ... 80 °C | ||
| LABS (PWIS) conformity | VDMA24364-B2-L | ||
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) | ||
| Mode of operation | Double-acting | ||
| Variants | For unlubricated operation | ||
| Design | Guidance | ||
| Mounting position | optional | ||
| Operating mode, drive unit | Yoke | ||
| Stroke | 10 mm ... 400 mm |
