| valve raw body manufacture | cast | ||
| valve construction | valve complete | ||
| main valve operating principle | angle seat valve | ||
| product sub-group | on/off valves | ||
| body nominal size (in) | 1 inch | ||
| orifice | 25 mm | ||
| actuator version | classic | ||
| control air connection material | stainless steel | ||
| control air connection 2 pre-mounted | plug | ||
| control air connection diameter (inch) | 1/4 inch | ||
| control air connection type | internal thread | ||
| actuator material | pa (polyamide) | ||
| actuator size | 63 mm | ||
| packed seal enclosed | yes | ||
| seat seal material | ptfe (polytetrafluorethylene) | ||
| temperature environment max | 55 °c | ||
| temperature medium max | 185 °c | ||
| nominal pressure (din en 1759) | class 150 | ||
| control pressure max | 10 bar | ||
| nominal pressure max | 11 bar | ||
| valve body surface treatment external | untreated | ||
| valve body material | stainless steel | ||
| port connection 1 dn inch | 1 inch2 | ||
| port connection 1 pipe standards 1 | asme bpe | ||
| port connection 1 wall thickness inch | 0,065 inch2 | ||
| port connection 1 size dn | dn 25 | ||
| port connection 1 outer diameter (inch) | 1 inch | ||
| sip capable | yes | ||
| Control function | a - normally closed (nc) | ||
| fluidic port connection number | 2 |
| installation length | 152 mm | ||
| valve piloting type | pneumatic | ||
| flow | below seat | ||
| Type | 2,000 | ||
| body nominal size | 25 mm | ||
| kv value (water) | 16 m3/h | ||
| control air hole diameter | 2 mm | ||
| control air connection position | in line direction | ||
| control air connection 1 pre-mounted | plug | ||
| control air connection thread type | g | ||
| interface to actuator | metric | ||
| actuator material category | plastics | ||
| approval type | iecex, atex | ||
| seal nipple body material | graphite | ||
| seat seal material category | plastics | ||
| temperature environment min | -10 °c | ||
| temperature medium min | -10 °c | ||
| nominal pressure (din en 1333) | pn 25 | ||
| control pressure min | 4,5 bar | ||
| nominal pressure min | 0 bar | ||
| valve body surface treatment internal | unmachined | ||
| valve body material category | metals | ||
| port connection 1 pipe standard 2 | din 11866 serie c | ||
| port connection 1 outer diameter (mm) | 25,4 mm | ||
| port connection 1 wall thickness (mm) | 1,65 mm | ||
| port connection 1 inner diameter (mm) | 22,1 mm | ||
| port connection 1 type | weld end | ||
| cip capable | yes | ||
| valve function number of switching positions | 2 | ||
| Customscode | 84818073 |
