| Material del cuerpo | PA-reinforced PC | ||
| LED display, product-specific | ERR: PLC runtime error M: Modify/forcing active PL: Load supply PS: Electronics supply, sensor supply RUN: PLC status SF: System fault STOP: PLC status | ||
| Ethernet interface | RJ45 (socket, 8-pin) | ||
| Longitud máx. del cable | 30 m | ||
| Ethernet, plug connector | RJ45 Bushing 8-pin | ||
| Ethernet, data transmission rate | 10/100 Mbit/s | ||
| Peso del producto | 135 g | ||
| Grado de protección | IP65 IP67 | ||
| Temperatura de almacenamiento | -20 °C ... 70 °C | ||
| Program memory | 16 MB user program | ||
| Programming software | CODESYS provided by Festo | ||
| Tensión nominal de funcionamiento DC | 24 V | ||
| Flag | 28 kB remanent data CODESYS variable concept | ||
| IP address setting | DHCP Via CODESYS Via MMI | ||
| Data interface | RS 232 interface Sub-D, 9-pin, bushing 9.6 ... 230.4 kbit/s Galvanically isolated | ||
| Programming, support for file handling | yes | ||
| Operator controls | Rotary switch for RUN/STOP | ||
| Configuration support | CODESYS V3 | ||
| CPU data | 256 MB RAM 32 MB flash 800 MHz processor | ||
| Dimensiones: ancho x largo x alto | 50 x 107 x 55 mm |
| Nota sobre el material | RoHS-compliant | ||
| LED display, bus-specific | TP: Link/traffic | ||
| Serial interface, number | 1 | ||
| Protocolo | CODESYS Level 2 EasyIP Modbus® TCP TCP/IP | ||
| Ethernet, supported protocols | TCP/IP, EasyIP, Modbus TCP | ||
| Ethernet, number | 1 | ||
| Temperatura ambiente | -5 °C ... 50 °C | ||
| Humedad relativa del aire | 95 % Non-condensing | ||
| Clase de resistencia a la corrosión CRC | 2 - Moderate corrosion stress | ||
| Programming language | To IEC 61131-3 KOP AWL ST FUP AS Additionally CFC | ||
| Power failure bridging | 10 ms | ||
| Nominal DC operating voltage, load voltage | Without pneumatic components: 18 ... 30 V 24 V With pneumatics type midi/maxi: 21.6 ... 26.4 V With pneumatics type CPA: 20.4 ... 26.4 V With pneumatics type MPA: 18 ... 30 V | ||
| Function modules | Read CPX module diagnostics CPX diagnostic status Copy CPX diagnostic trace And others | ||
| Intern power consumption nominal operating voltage | Typ. 85 mA | ||
| Processing time | Approx. 200 µs/1 k instruction | ||
| Programming, operating language | DE, EN | ||
| Funciones adicionales | Diagnostic functions RS232 communication function | ||
| Parameterisation | CODESYS V3 | ||
| Device-specific diagnostics | Channel-oriented and module-oriented diagnostics Undervoltage/short circuit of modules Diagnostic memory |
