| Contact angle | α | 60 | ° |
| Rib diameter inner ring | d1 | 30 | mm |
| Minimum chamfer dimension | rmin | 0.60 | mm |
| Minimum diameter shaft | da min | 23 | mm |
| Maximum diameter of housing | Da max | 37 | mm |
| Bearing frictional torque | MR | 0.24 | Nm |
| Limiting speed for grease lubrication | nG Grease | 7,600 | |
| Basic static load rating, axial | C0a | 31,500 | |
| Width lower tolerance | -0.25 | mm | |
| Outside diameter lower tolerance | -0.01 | mm | |
| Bore diameter lower tolerance | -0.01 | mm |
| Thermally safe operating speed | nϑ | 3,300 | |
| Fatigue load limit, axial | Cua | 1,440 | |
| Basic dynamic load rating, axial | Ca | 18,900 | |
| Width | B | 25 | mm |
| Outside diameter | D | 47 | mm |
| Bore diameter | d | 17 | mm |
