| Contact angle | α | 25 | ° |
| Minimum chamfer dimension | rmin | 2 | mm |
| Distance between the apexes of the pressure cones | a | 46.60 | mm |
| Distance to lubrication hole | SN | 16.20 | mm |
| Maximum recess radius | ra max | 1 | mm |
| Shoulder diameter outer ring | Da | 159 | mm |
| Diameter shaft shoulder | da | 121 | mm |
| Width of lubricating groove | SB | 2.20 | mm |
| Distance ring grooves | BN | 6 | mm |
| Shoulder diameter outer ring clearance | Da | H12 | |
| Diameter shaft shoulder clearance | da | h12 |
| Limiting speed for oil lubrication | nG Oil | 22,000 | |
| Fatigue load limit, radial | Cur | 2,330 | |
| Basic dynamic load rating, radial | Cr | 70,000 | |
| Outside diameter | D | 170 | mm |
| Limiting speed for grease lubrication | nG Grease | 14,000 | |
| Basic static load rating, radial | C0r | 34,000 | |
| Width | B | 28 | mm |
| Bore diameter | d | 110 | mm |
