Bore diameter | d | 12 | mm |
Basic dynamic load rating, radial | Cr | 3,550 | |
Outside diameter | D | 28 | mm |
Limiting speed for grease lubrication | nG Grease | 100,000 |
Basic static load rating, radial | C0r | 870 | N |
Width | B | 8 | mm |
Limiting speed for oil lubrication | nG Oil | 160,000 | |
Fatigue load limit, radial | Cur | 70 | N |
Contact angle | α | 25 | ° |
Minimum chamfer dimension | rmin | 0.30 | mm |
Distance between the apexes of the pressure cones | a | 8.70 | mm |
Minimum diameter injection pitch | Etk min | 17.30 | mm |
Shoulder diameter outer ring clearance | Da | H12 | |
Diameter shaft shoulder clearance | da | h12 |
Maximum diameter injection pitch | Etk max | 18.90 | mm |
Maximum recess radius | ra max | 0.10 | mm |
Shoulder diameter outer ring | Da | 24.50 | mm |
Diameter shaft shoulder | da | 16.50 | mm |