| Distance from locking device side face to raceway centre | s1 | 23.50 | mm |
| Length of attachment slot | N1 | 16 | mm |
| Length of locations slot | L3 | 52 | mm |
| Distance from attachment end face to centreline of spherical seat diameter | L1 | 64 | mm |
| Height of attachment end | H2 | 53 | mm |
| Overall height | H | 91 | mm |
| Overall bearing width | B | 31 | mm |
| Width of flange in which location slot is provided | A2 | 25 | mm |
| Overall width | A | 34 | mm |
| Shoulder diameter inner ring | d1 | ≈33.74 |
| Height of attachment slot | N2 | 33 | mm |
| Diameter of attachment bolt hole | N | 19 | mm |
| Length attachment end | L2 | 10 | mm |
| Overall length | L | 100 | mm |
| Distance between bottoms of location slot | H1 | 76 | mm |
| Distance from locking device side face to thread centre | B4 | 4.75 | mm |
| Standout of end cover | A5 | 19 | mm |
| Width of location slot | A1 | 13.50 | mm |
| Outside diameter locking ring | d2 | 37.40 | mm |
| Bore diameter | d | 25 | mm |
