| dust protection seal | UU - Seal Attached On Both Ends | ||
| max stroke (mm) | 120 | ||
| maximumstroke - with seals - mm | 120 | ||
| inscribed bore diameter - tolerance - mm | +0.041+0.025 | ||
| outer diameter - tolerance - mm | 0-0.013 | ||
| length - tolerance - mm | 0-0.3 | ||
| l1 - with seals - mm | 83.40 | ||
| t - mm | 1 | ||
| r - mm | 1.50 | ||
| basic load rating - static c0 - kn | 8.82 | ||
| mass - with seals - g | 920 |
| for shaft o.d. (mm) | 50 | ||
| maximumstroke - no seals - mm | 138 | ||
| inscribed bore diameter - dr - mm | 50 | ||
| outer diameter - d - mm | 72 | ||
| length - l - mm | 100 | ||
| l1 - no seals - mm | 92.40 | ||
| l2 - mm | 3 | ||
| d0 - mm | 3 | ||
| basic load rating - dynamic c - kn | 16.30 | ||
| mass - no seals - g | 910 |
