| dust protection seal | UU - Seal Attached On Both Ends | ||
| max stroke (mm) | 91 | ||
| maximumstroke - with seals - mm | 91 | ||
| inscribed bore diameter - tolerance - mm | +0.041+0.025 | ||
| outer diameter - tolerance - mm | 0-0.013 | ||
| length - tolerance - mm | 0-0.3 | ||
| l1 - with seals - mm | 64.90 | ||
| t - mm | 0.70 | ||
| r - mm | 1.50 | ||
| basic load rating - static c0 - kn | 6.76 | ||
| mass - with seals - g | 635 |
| for shaft o.d. (mm) | 45 | ||
| maximumstroke - no seals - mm | 108 | ||
| inscribed bore diameter - dr - mm | 45 | ||
| outer diameter - d - mm | 65 | ||
| length - l - mm | 80 | ||
| l1 - no seals - mm | 73.30 | ||
| l2 - mm | 2.50 | ||
| d0 - mm | 2.50 | ||
| basic load rating - dynamic c - kn | 12.60 | ||
| mass - no seals - g | 625 |
