| dust protection seal | UU - Seal Attached On Both Ends | ||
| max stroke (mm) | 17 | ||
| maximumstroke - with seals - mm | 17 | ||
| inscribed bore diameter - tolerance - mm | +0.027+0.016 | ||
| outer diameter - tolerance - mm | 0-0.009 | ||
| length - tolerance - mm | 0-0.2 | ||
| l1 - with seals - mm | 20.10 | ||
| t - mm | 0.50 | ||
| r - mm | 0.50 | ||
| basic load rating - static c0 - kn | 1.08 | ||
| mass - with seals - g | 49 |
| for shaft o.d. (mm) | 12 | ||
| maximumstroke - no seals - mm | 32 | ||
| inscribed bore diameter - dr - mm | 12 | ||
| outer diameter - d - mm | 23 | ||
| length - l - mm | 32 | ||
| l1 - no seals - mm | 27.50 | ||
| l2 - mm | 1.50 | ||
| d0 - mm | 1.50 | ||
| basic load rating - dynamic c - kn | 4.02 | ||
| mass - no seals - g | 47 |
