| Symbol | 995,956 | ||
| Corrosion resistance class CRC | 0 - No corrosion stress | ||
| Insulation voltage | 500 V | ||
| Setting options | IO-Link® Potentiometer | ||
| Material housing | Die-cast zinc, coated | ||
| Fork gap | 80 mm | ||
| Electrical connection | 3-pin M8x1 Plugs | ||
| No-load supply current | 30 mA | ||
| Operational voltage range DC | 10 V ... 30 V | ||
| IO-Link, Min. cycle time | 2.3 ms | ||
| IO-Link, Process data content IN | 1 bit BDC (switching signal) 1 bit BDC (stability) 12 bit PDV (signal level) | ||
| IO-Link, Process data length OUT | 0 bytes | ||
| IO-Link, SIO-Mode support | Yes | ||
| IO-Link, Function classes | Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel | ||
| IO-Link, Protocol version | Device V 1.1 | ||
| Short circuit current rating | Pulsed | ||
| Max. output current | 100 mA | ||
| Max. switching frequency | 5.000 Hz | ||
| Switching element function | Switchable | ||
| Repetition accuracy | 0,02 mm | ||
| Note on min. object diameter | 0.3 mm with standard mode 0.2 mm with high resolution mode 1.0 mm with power mode 0.3 mm with speed mode | ||
| Type of light | Red | ||
| Measuring principle | Optoelectronic | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Approval | RCM trademark c UL us listed (OL) |
| Pollution degree | 3 | ||
| Immunity to surge | 0,8 kV | ||
| Degree of protection | IP67 | ||
| Switching status indication | Yellow LED | ||
| Product weight | 118 g | ||
| Size | Fork 80x55 mm | ||
| Reverse polarity protection | For all electrical connections | ||
| Residual ripple | ± 5% | ||
| IO-Link, Data storage required | 73 Byte | ||
| IO-Link, Service data IN | 16 bit maximum signal level 16 bit minimum signal level 16 bit temperature 32 bit switching counter 8 bit teach-in quality | ||
| IO-Link, Process data length IN | 2 bytes | ||
| IO-Link, Port class | A | ||
| IO-Link, communication mode | COM2 (38.4 kBaud) | ||
| IO-Link, Profile | Smart sensor profile | ||
| Protocol | IO-Link® | ||
| Timer function | Via IO-Link® | ||
| Note on switching frequency | 5000 Hz with standard mode 1500 Hz with high resolution mode 250 Hz with power mode 8000 Hz with speed mode | ||
| Hysteresis | ≤ 0,1 mm | ||
| Switching output | Push-pull NPN PNP | ||
| Ambient temperature | -25 °C ... 60 °C | ||
| Min. object diameter | 0,3 mm | ||
| Measurement method | Fork light barrier | ||
| Measured variable | Position | ||
| CE mark (see declaration of conformity) | To EU EMC Directive |
