Conforms to standard | EN 60947-5-2 | ||
Electrical output | NPN | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Degree of protection | IP67 IP69K | ||
Switching status indication | Yellow LED | ||
Product weight | 53 g | ||
Type of mounting | Via lock nut | ||
Electrical connection | 3-pin M12x1 Plugs | ||
No-load supply current | ≤ 17 mA | ||
Operational voltage range DC | 10 V ... 30 V | ||
Inductive protective circuit | Integrated Output current < 100 mA and switching frequency < 10 Hz | ||
Max. output current | 200 mA | ||
Hysteresis | ≤ 1,22 mm | ||
Switching element function | N/O contact | ||
Ambient temperature | -25 °C ... 70 °C | ||
Assured operating distance | 8,1 mm | ||
CE mark (see declaration of conformity) | To EU EMC Directive | ||
Symbol | 991,703 |
Selection of sensor design | Stainless steel housing | ||
Additional information for sensor selection | with increased sensing distance | ||
Housing pressure resistance | 60 bar | ||
Ambient temperature with moving cable | -5 °C ... 70 °C | ||
Material housing | High-alloy steel | ||
Mounting type | Flush | ||
Size | M18 | ||
Reverse polarity protection | For all electrical connections | ||
Residual ripple | 20% | ||
Short circuit current rating | Pulsed | ||
Voltage drop | ≤ 2 V | ||
Max. switching frequency | 200 Hz | ||
Reproducibility of switching values FS | 0,5 mm | ||
Switching output | NPN | ||
Reduction factors | Aluminium = 1.0 Stainless steel, 1 mm thick = 0.4 Stainless steel, 2 mm thick = 0.8 Copper = 0.85 Brass = 1.3 Steel St 37 = 1.0 | ||
Rated operating distance | 10 mm | ||
Approval | RCM trademark c UL us listed (OL) |