| Conforms to standard | EN 60947-5-2 | ||
| Electrical output | PNP | ||
| Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
| Degree of protection | IP67 IP69K | ||
| Switching status indication | Yellow LED | ||
| Product weight | 90 g | ||
| Type of mounting | Via lock nut | ||
| Material cable sheath | TPE-U(PUR) | ||
| Reverse polarity protection | For all electrical connections | ||
| Residual ripple | 20% | ||
| Short circuit current rating | Pulsed | ||
| Voltage drop | 2 V | ||
| Max. switching frequency | 600 Hz | ||
| Reproducibility of switching values FS | 0,3 mm | ||
| Switching output | PNP | ||
| Reduction factors | Aluminium = 1.0 Stainless steel, 1 mm thick = 0.45 Stainless steel, 2 mm thick = 0.9 Copper = 0.85 Brass = 1.3 Steel St 37 = 1.0 | ||
| Rated operating distance | 6 mm | ||
| Approval | RCM trademark c UL us listed (OL) |
| Selection of sensor design | Stainless steel housing | ||
| Additional information for sensor selection | with increased sensing distance | ||
| Housing pressure resistance | 80 bar | ||
| Ambient temperature with moving cable | -5 °C ... 70 °C | ||
| Material housing | High-alloy steel | ||
| Mounting type | Flush | ||
| Size | M12 | ||
| Electrical connection | 3-wire Cable | ||
| No-load supply current | < 12 mA | ||
| Operational voltage range DC | 10 V ... 30 V | ||
| Inductive protective circuit | Integrated Output current < 100 mA and switching frequency < 10 Hz | ||
| Max. output current | 200 mA | ||
| Hysteresis | ≤ 0,73 mm | ||
| Switching element function | N/O contact | ||
| Ambient temperature | -25 °C ... 70 °C | ||
| Assured operating distance | 4,86 mm | ||
| CE mark (see declaration of conformity) | To EU EMC Directive | ||
| Symbol | 991,702 |
