CE marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions | ||
Approval | RCM trademark | ||
Suitability for the production of Li-ion batteries | Metals with more than 1% copper, zinc or nickel by mass are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils | ||
Corrosion resistance class CRC | 2 - Moderate corrosion stress | ||
Material housing | PA-reinforced | ||
Pneumatic connection | Female thread M5 | ||
Type of mounting | In-line installation With through-hole With accessories | ||
Cable length | 2,5 m | ||
Electrical connection 1, connector system | Open end | ||
Reverse polarity protection | For all electrical connections | ||
Operational voltage range DC | 22 V ... 26 V | ||
Short circuit current rating | yes | ||
Rise time | 3 ms | ||
Repetition accuracy in ± %FS | 1 %FS | ||
Ambient temperature | 0 °C ... 50 °C | ||
Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] Nitrogen | ||
End value for flow rate sensing range | 10 l/min | ||
Measurement method | Heat Loss | ||
Flow direction | Unidirectional | ||
Note on materials | RoHS-compliant |
CE mark (see declaration of conformity) | To EU EMC Directive In accordance with EU RoHS Directive | ||
Symbol | 991,853 | ||
LABS (PWIS) conformity | VDMA24364-B2-L | ||
Degree of protection | IP40 | ||
Product weight | 37 g | ||
Mounting position | optional | ||
Material cable sheath | TPE-U(PUR) | ||
Electrical connection 1, number of connections/cores | 3 | ||
Electrical connection 1, connection type | Cable | ||
No-load supply current | ≤ 17 mA | ||
Overload protection | Available | ||
Min. load resistance voltage output | 20 kOhm | ||
Analogue output | 1 - 5 V | ||
Nominal temperature | 23 °C | ||
Media temperature | 0 °C ... 50 °C | ||
Operating pressure | -0,9 bar ... 10 bar | ||
Start value for flow rate sensing range | 0 l/min | ||
Measuring principle | Thermal | ||
Measured variable | Mass flow rate Volumetric flow rate | ||
KC mark | KC-EMV |