| A | 42 | mm | |
| B1 | 65 | mm | |
| B4 | 20 | mm | |
| D1 | 20 | mm | |
| D3 | 18 | mm | |
| H1 | 40 | mm | |
| Tolerance for H2 | ± 0.1 | ||
| Tolerance for T3 | - 0.4 |
| Tolerance for A | ± 0.2 | ||
| B2 | 23 | mm | |
| C | 13 | mm | |
| D2 | 11 | mm | |
| F x 45° | 1.60 | ||
| H2 | 20 | mm | |
| T3 | 11 | mm | |
| α°Fmax (Bearing pivots for vertical load; if α Fmax. is not complied with, a positive lock must be added ) | 110 70 |