| D | 120 | mm | |
| A1 (Tolerance ISO 8062-3 - DCTG 9.) | 85 | mm | |
| B1 | 125 | mm | |
| E2 | 90 mm ±0.5 | ||
| Tolerance for H (Clamped (fastened) in relation to Ø d.) | + 7 - 28 |
||
| L | 165 | mm | |
| SW | 14 |
| A (Tolerance ISO 8062-3 - DCTG 9.) | 200 | mm | |
| B (Tolerance ISO 8062-3 - DCTG 9.) | 122 | ||
| E1 | 170 mm ±0.5 | ||
| H | 80 | mm | |
| H1 (Tolerance ISO 8062-3 - DCTG 9.) | 170 | mm | |
| S | 13.50 | ||
| V (Tolerance ISO 8062-3 - DCTG 9.) | 22 | mm |
| amax | 50 | m/s² | |
| m | 15.32 | kg | |
| Breakaway force | 45 | N | |
| Operating conditions | Operating conditions |
| vmax | 2 | m/s | |
| FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 15 | N | |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||
| Permissible ambient temperature (min ... max) | -10 °C ... +80 °C |
