| V | 50 | mm | |
| e | 33 | ||
| m | 7 | ||
| O1 (DIN 6912-8.8) | M5x20 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 100 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 5 | mm |
| A | 45 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 26 mm ±0.01 | ||
| N | 9 | mm | |
| O2 (DIN6912-8.8, only applicable for bolting with steel or cast iron threads.) | M5x16 | ||
| T | 7.60 | mm | |
| V | 5 | mm |
| m | 2.65 | kg |
