| V | 8 | mm | |
| U1 (DIN 7980, discontinued. Spring washer commercially available.) | 10 | mm | |
| A | 78 | mm | |
| H (Measured with gauging shaft, nominal dimension d and length about 50 mm.) | 60 mm ±0.05 | ||
| M1 | 18 | ||
| O1 (ISO 4762-8.8) | M10x45 | ||
| T (For transverse loads on the Linear Bushing opening and when approaching maximum load, as well as when dimensional accuracy is strictly required. ) | 200 | mm |
| T | 13.50 | mm | |
| U2 (DIN 125) | 8 | mm | |
| e | 55 | ||
| m | 15 | ||
| N | 19 | mm | |
| O2 (ISO 4762-8.8 oder ISO 4017-8.8, only applicable for bolting with steel or cast iron threads. ) | M8x25 |
| m | 13.30 | kg |