Specifications
Lubrication | Weight |
---|---|
No initial lubrication | 20g |
B | 22 | ||
D1 | 28 | mm | |
L | 22 mm ±0.3 | ||
L1 | 5 mm | ||
V | 3.10 | mm |
D | 12 mm -0.013 | ||
D2 | 20 | mm | |
L1 | 5 | mm | |
S | 3.50 |
amax | 100 | m/s² | |
m | 0.02 | kg | |
Breakaway force | 0.80 | N | |
Working bore diameter tolerance | + 8 0 |
||
Operating conditions | Operating conditions |
vmax | 2.50 | m/s | |
FR (Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. ) | 0.40 | N | |
Rows of balls | 4 | ||
Shaft radial clearance h6 (Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7. ) | + 14 + 2 |
||
Permissible ambient temperature (min ... max) (Only unsealed Linear Bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. ) | -10 °C ... +80 °C |