| Bore diameter | d | 260 | mm |
| Width | B | 80 | mm |
| Basic static load rating, radial | C0r | 1,630,000 | |
| Limiting speed | nG | 2,320 |
| Outside diameter | D | 480 | mm |
| Basic dynamic load rating, radial | Cr | 840,000 | |
| Fatigue load limit, radial | Cur | 44,000 | |
| Reference speed | nϑr | 1,080 |
| Minimum diameter shaft shoulder | da min | 280 | mm |
| Maximum fillet radius | ra max | 4 | mm |
| Maximum diameter of housing shoulder | Da max | 460 | mm |
| Minimum chamfer dimension | rmin | 5 | mm |
| Shoulder diameter inner ring | d1 | 338.40 | mm |
| Hight retaining slot | t | 15 | mm |
| Radius retaining slot | rn | 2.50 | mm |
| Contact angle | α | 35 | ° |
| Shoulder diameter outer ring | D1 | 401.80 | mm |
| Distance between the apexes of the pressure cones | a | 259 | mm |
| Width retaining slot | b | 12.50 | mm |
| Angle retaining slot | 45 | ° |
