| Contact angle | α | 35 | ° |
| Radius retaining slot | rn | 0.50 | mm |
| Hight retaining slot | t | 4 | mm |
| Shoulder diameter inner ring | d1 | 63.70 | mm |
| Minimum chamfer dimension | rmin | 1.10 | mm |
| Angle retaining slot | 45 | ° | |
| Width retaining slot | b | 5.50 | mm |
| Distance between the apexes of the pressure cones | a | 49 | mm |
| Shoulder diameter outer ring | D1 | 76.40 | mm |
| Maximum fillet radius | ra max | 1 | mm |
| Minimum diameter shaft shoulder | da min | 57 | mm |
| Maximum diameter of housing shoulder | Da max | 83 | mm |
| Reference speed | nϑr | 6,700 | |
| Fatigue load limit, radial | Cur | 3,950 | |
| Basic dynamic load rating, radial | Cr | 62,000 | |
| Outside diameter | D | 90 | mm |
| Limiting speed | nG | 15,200 | |
| Basic static load rating, radial | C0r | 56,000 | |
| Width | B | 20 | mm |
| Bore diameter | d | 50 | mm |
